LitePlacer.com forums

Adam, thanks for your insights, but if you would read the complete thread you would also see my solution of the problem.

Juha; got the replacement motor, thank you, now all of the axis work.

My findings 1. motor does rotate freely 2. coil pairs match up with approx. 4Ohm resistance on each coil (red/black and blue/green) 3. resistance between different coils is not infinite but about 1.5MOhm (ie. red/blue) 4. switching Z and A axis outputs on tinyG proved that motor4 driver works as the...

Motor does rotate freely, this I tested quickly today before going out, will test with motor drivers later in the day and let you know.

Thank you! Now I have come across another problem that seems to just present it self, I was doing the calibration and stuff, preparing the component tapes and when I went to the job tab and remeasured everything all was OK, but then I clicked "calibrate needle" now I see there is a problem...

Solved it, since I didn't use the plate to fix the chain to the extrusion for Y axis and had it fixed to the table directly I had the plate extra, I fixed it on the p&p head and tied the chain to it, so now it doesn't drop down.

I have just "assembled" my pickup needles and the think of using hot glue to hold the shades in place was not appealing to me so I though why not use super glue. I first pushed the needle through the shade to create the "mounting" hole and then I dabbed a little super glue on the...

Some pictures what happens when "Test X" is performed.

Almost done... The instructions for hardware assembly are really out of this world, they are really great, there is almost nothing you can miss, maybe just a small correction as stated before from another user, where you mark back extrusion with the same color on both sides, that one had me for a mi...

Solved it; went into device manager, selected one of the cameras and clicked "Update driver" then selected to browse manually for a driver and continued to select from a list of devices, selected "Imaging devices" -> Microsoft -> USB Video camera. It works now... I can now contin...

Both, a new USB device is detected but no driver is then loaded by windows.