Software release, 11/04/2016

Post Reply
JuKu
Site Admin
Posts: 1110
Joined: Thu Feb 14, 2013 3:06 pm
Location: Tampere, Finland
Contact:
Contact JuKu

Software release, 11/04/2016

Post by JuKu »

Added a user settable limit (instead of a hard coded value) to allow movement below PCB level. Now you can use thick boards and calibrate the machine to a PCB on supports, but still have some protection. Note, that the limit does not apply to probing.
Top
Post Reply

Return to “LitePlacer Software”