Enclosure build for Tinyg and DC supply

Post Reply
sebastian
Posts: 31
Joined: Wed Nov 30, 2016 7:54 pm

Enclosure build for Tinyg and DC supply

Post by sebastian »

I am happy to share pictures and design files of our build. We bought a cheap MiniITX pc enclosure and created a custom plate to attach tinyg to where the mainboard normally resides. The DC power supply is not properly attached yet but we are currently too lazy to drill holes into the bottom of the enclosure... ;)
Another nice feature of this pc enclosure is that it has an AC jack at the back that is wired internally to the DC supply, by cutting the end of this cable and routing it to the meanwell dc converter you get a proper single AC plug for the entire liteplacer hardware. With the desktop form factor you can nicely put a monitor and the emergeny stop button on top of this:

https://wiki.apertus.org/index.php/Lite ... _Enclosure
www.apertus.org
building a community driven free software & open hardware digital cinema camera
Top
Post Reply

Return to “Building the LitePlacer”