LitePlacer.com forums

How do I reset all placed checkmarks?

I am using 500 accel and 5000 speed.

Ok, I was finally able to get to this today. Here is what I found out. It was a combination of loose nozzle adapter and bad measurements of cam to nozzle distances. Overall, I'm pretty happy with 0402 placements after fine adjustments. I didn't have to move none after I dialed in the cam/nozzle dist...

I just got my pcb in the mail today and started playing with component placement. I have the machine calibrated, the tapes are setup and everything looks good. The machine picks up the components from tape dead center, but when it goes to place it on the PCB, it just lands really far. Like 1 or 2 mm...

Yes, that worked.
Thanks!!

Which Z settings?
On basic setup, I have 4 fields for acceleration and speed and then home acceleration and speed.
When I change them, they don't seem to take effect.
Do I need to click "Load user defaults to TinyG" button for them to be used?

Ok, so here is what I did. Turn on Home Place here It went to calibrate the nozzle Came back and did a successful place here Place here again Halted Here is the log: Application Start Version: 1.0.6151.32041, build date: 11/3/2016 5:48:02 PM Reading v2 format file C:\LitePlacer\LitePlacer.HomingFunc...

Yes, it hits the upper Z limit switch and resets. {"er":{"fb":440.20,"st":204,"msg":"Limit switch hit - Shutdown occurred"}} CNC_XY_m, x: 174.844945, y: 24.47 ### Cnc in error state, ignored Here is a video: https://www.dropbox.com/s/9ytdguvtfr8b8gy/...

Everytime I use the place here button, I get a tinyg reset.
What can I do to prevent this?
Is there a way to adjust the Z for "Pickup this" and "Place here" buttons?

Nevermind.
I didn't know about the edit option.
When I opened, I was surprised it was set as custom, even though I originally set as 8/2mm.
I changed to 8/2mm and it worked fine.