LitePlacer.com forums

The clear tape cover is partially removed from the tape but still fixed on one side, it stays with the tape and is fed out of the bottom with the tape. Neat idea, I don't recall seeing that before. So the tape is essentially being pushed by the stepper and the cover comes off partially & reliab...

Looks great... Comments etc: - What s/w are you running LP or openPNP? - The grey one looks like a manual feeder option??? - The hole required in the table could be an issue for some/many existing users. Is the a way to invert the position of these feeders??? or mount on table edge? - Have you publi...

I use the following from Mean Well with 8.4A

MW SP-200-24

JuKu wrote: ↑Sun Aug 07, 2022 9:32 am Which boxes are you referring to?

The one for setting the threshold value in the SVP tab /video processing function. It appears only when the threshold function row is highlighted.

Finally got to try out the latest beta (25072022) and haven't seen any issues so far. Got the up camera vision recognizing 0805 Rs & Cs and also a QFN32 part. Need to try it out some more later. One suggestion not related to beta. It would be helpful if we could increment the up/down box for thr...

tnx

Note 3: If calibrating all nozzles from Nozzle tab, it seems the vision does not work. However, if I start it for all nozzles and quickly change to the SVP tab and select allow move with nozzle down it seems to go ahead. This can be tricky to get right. If I do each nozzle using 'calibrate current' ...

Note 2: In the SVP tab, if a home is required and the up camera is selected, the home does not work. The Home should always use the down camera when looking for the dot. It seems it is using the up camera when looking for the dot.

Quick Note: The big homing button when in the nozzle tab does not appear to work. It just goes red when clicked. This may be by design....if so disabling the button or displaying a pop-up message may be better.

Regarding my previous issues, it looks like I was using the wrong backup copy.

I could not reproduce the nozzle config data loss. OK I will look at it again over the weekend. The only thing I can think of is that I ran the exe after download, thinking it would be an install/setup file. Maybe that reset the nozzle data. I then exited and proceeded to copy the exe to the direct...