LitePlacer.com forums

If you look at this machine from above, what is the correct rotation direction of the nozzle motor? +90 degree is clockwise from above view?

purchased others also sucks, endoscope (https://www.prolech.nl/webshop/endoscoop/detail/915/2-meter-usb-endoscoop-o-7-mm-met-led.html). Who have the same problem, but less. With these you can also see a moving image as the cable moves. But these are on the PC side even worse. USB connection is lost ...

The cameras wich are supplied with mine machine suck. The lens and camera are sitting loose in the housing. If you move the cable, this also moves the camera inside. While the casing has been clamped and is fixed. Especially the camera on the z-axis is a problem of which the cable moves. Took a whil...

Thanks for the comments.

Software performs only measurements if the nozzle is raised? Or do I see this wrong?

Would like the nozzle and camera fixed together, so that there distance is a constant. Even though the z-axis slightly skewed.

The downward camea, can this one be fixed to the moving z-axis. That it goes up and down along with the nozzle.

Has this too much influence on the operation of position determination?

I'm using nozzles from JUKI for example 502 and a 1 size bigger one during testing. Very often the components stay sticked to the nozzle, after placement. I do not use solder paste at this moment. Is this is normal :? , you really have to trust on the quality of the solderpaste for placing component...

Replacing the USB camera drivers with those from windows (year 2006) and the last version software. Seems to work on some systems. If you connect the camera to a different USB port, check which driver it uses. Probably those from the manufacturer.

Seems the same problem I have. Suspects selection combination "robust and keep active" setting which lets the software crash very often after a while. Still can not lay a finger on the problem. This adjustment is in the latest version software 26.02.2016? This version is used on another PC...

A beep sound when an error occurs and another kind beep at a break point by the software.

I used Ctrl + F11 to jog up, the time out.

Only F11 works well, no time out.