Andonstar microscope

[dave]

Hi Guys.

Sorry for so many questions about my bespoke machine, I plan to put this Andonstar microscope on my picker head.

1: Dose the Andonstar microscope need additional LED or existing ones changed in color. Or can this work ok without additional support straight out of the box.

2: my picker head is 75mm wide. the camera is so close to the head you might see the head if its in the down position. Is there something in software to lift the head out of the way before taking a down image. If the picker is caught in the image will it mess up the software or shall I be more careful with the angles of vision.

[JuKu]

1: It probably works as it is. the software uses standard web cam interface.

2: All the images from downcam are taken with head up.