Lightplacer CAD Files

Post Reply
User avatar
Mark Harris
Posts: 38
Joined: Sat Nov 14, 2015 12:34 am
Location: Calgary, AB

Lightplacer CAD Files

Post by Mark Harris »

I want to make some measurements on the liteplacer for cable lengths and motor upgrades, but I only have SolidWorks. From what I've found searching around almost nothing can open an Alibre file except Alibre... Would someone be able to export the files from Alibre as STEP or Parasolid files?
Top
JuKu
Site Admin
Posts: 1114
Joined: Thu Feb 14, 2013 3:06 pm
Location: Tampere, Finland
Contact:
Contact JuKu

Re: Lightplacer CAD Files

Post by JuKu »

Step file: http://www.liteplacer.com/Downloads/liteplacer_v1_1.zip
Top
User avatar
Mark Harris
Posts: 38
Joined: Sat Nov 14, 2015 12:34 am
Location: Calgary, AB

Re: Lightplacer CAD Files

Post by Mark Harris »

Thanks JuKu, there's a few odd faces in there but nothing that will stop me from doing what I want to do :D
Top
mackedanzchr
Posts: 9
Joined: Mon Aug 21, 2017 7:56 pm

Re: Lightplacer CAD Files

Post by mackedanzchr »

JuKu,

Is it possible to get a cad model (in .step) file of the magazine / nozzle holder?
Top
Post Reply

Return to “Building the LitePlacer”