Computer Requirements

Post Reply
CaptCrash
Posts: 4
Joined: Tue Jun 09, 2015 2:54 pm

Computer Requirements

Post by CaptCrash »

I have ordered a Liteplacer and wanted to get the computer and software installed in preparation.
I am looking at dedicating the computer to the task (most likely something like a Mac Mini running Windows or similar).

Is there a minimum/recommended requirements list for the hardware/OS software for the Liteplacer?

I haven't been able to find anything on the web site or in the forum.

eg.
Memory requirements
Processor requirements
Minimum display resolution
OS Support/Recommended
USB ports (number required)
Other requirements (serial ports/USB serial adapter etc)

thanks
JuKu
Site Admin
Posts: 1114
Joined: Thu Feb 14, 2013 3:06 pm
Location: Tampere, Finland
Contact:

Re: Computer Requirements

Post by JuKu »

I'll add those, thank you for suggestion!

The software is not demanding. It is tested on Win7 and Win8, but I see no reason why it wouldn't work on older machines. notable requirements are:
-3 USB ports (the cameras and the TinyG CNC controller work behind a hub)
-OS support for web cams
-display resolution 1280x960
CaptCrash
Posts: 4
Joined: Tue Jun 09, 2015 2:54 pm

Re: Computer Requirements

Post by CaptCrash »

Thanks for the quick reply
Post Reply