we upgraded to a bigger machine so my liteplacer is for sale now.
It is build on a alu plate in the moment, Y rails are 1m, comes with milled pcb holder and milled strip holders.
I wanted to reduce Y to original depth and made a milled alumnium plate with milled stripfeeders and pcb holder too.
The control box is a small chassis with power supply, construction not perfect but works well.
I also have a new chassis availabe but not finished and not in use yet. Connectors Box to Machine are XLR.
Bearings are optimized to no slack, drive shaft is precisision stainless steel, all rails x, y and z are seperately grounded.
Bottom Cam is Logitech (see Malte Randt here in Forum) , Top Cam is Andonstar 2 Mp Microscope USB camera.
- same...
- pic1.JPG (90.2 KiB) Viewed 3698 times
- Machine with 1m Y Rails
- pic0.JPG (155.29 KiB) Viewed 3698 times
- Usefull things, strip feeder, box for roles, spare parts.....
- pic2.JPG (179.47 KiB) Viewed 3698 times
- milled pcb and strip holders
- pic5.JPG (235.89 KiB) Viewed 3698 times
- Milled alu plate for origianl machine size
- pic4.JPG (139.19 KiB) Viewed 3698 times
- Controlbox, but also newer and better one available and included.
- pic3.JPG (259.01 KiB) Viewed 3698 times
Machine "is as it is" with all parts as above, Price is Cash and Carry Euro 1200,- (Pick up, no shipment).
Added 16.8.2018:
Price set to Euro 1000,- , additional shipping costs world wide, but without big plate and stripholders for this plate.