Wood-Placer

[Pixopax]

I have M1.6 screws on my tape holders

A really good idea, sad enough, my tape holder are not high enough for that, only 4mm room.
I now use PS-strips in several thicknesses.

[dampfboot]

First dry runs
- before I can perfome a real p&p job I have to find/make some good nozzels for the bigger parts.

https://youtu.be/cGE4Ordz6B8

Rainer

[dampfboot]

I finished the first 4 prototypes. I am happy with this.



It was all placed with the same inner diameter 1 mm nozzle. Because of the rotation acceleration of the A-axis the 470 µF capacitor is not properly oriented - but i had to find a compromise. Over 140 parts done by the Liteplacer software. 0805 mostly...

A short video of the p&p job

https://youtu.be/gQNk62RwQa4

Rainer

[Gsain123]

I think I will try to prolong the left "grip" down to the holder plate surface and add a 2mm screw running through a hole in the left plus an embedded 2mm nut in the static (darkred) bottom part.