Page 2 of 2
Re: Wood-Placer
Posted: Mon Jun 20, 2016 7:08 am
by Pixopax
I have M1.6 screws on my tape holders
A really good idea, sad enough, my tape holder are not high enough for that, only 4mm room.
I now use PS-strips in several thicknesses.
Re: Wood-Placer
Posted: Tue Jun 21, 2016 10:11 pm
by dampfboot
First dry runs
- before I can perfome a real p&p job I have to find/make some good nozzels for the bigger parts.
https://youtu.be/cGE4Ordz6B8
Rainer
Re: Wood-Placer
Posted: Mon Jun 27, 2016 11:23 pm
by dampfboot
I finished the first 4 prototypes. I am happy with this.
It was all placed with the same inner diameter 1 mm nozzle. Because of the rotation acceleration of the A-axis the 470 µF capacitor is not properly oriented - but i had to find a compromise. Over 140 parts done by the Liteplacer software. 0805 mostly...
A short video of the p&p job
https://youtu.be/gQNk62RwQa4
Rainer
Re: Wood-Placer
Posted: Thu Feb 01, 2018 9:52 am
by Gsain123
I think I will try to prolong the left "grip" down to the holder plate surface and add a 2mm screw running through a hole in the left plus an embedded 2mm nut in the static (darkred) bottom part.