[Solved] Jogging accuracy issue
Posted: Mon Jul 20, 2015 4:02 am
I'm trying to set the machine up and number just are not matching up.
I eventually put a ruler under the downward facing camera to find out the issue. When I jog in one direction and the same distance in the other direction I don't end up in the same spot. As I repeat the error increasing with every iteration.
Alt-F7,Atl-F8 it 10 mm up and 10 mm down. After 5 iterations in landing 1mm above the start location. After 25iterations i'm landing at the 5mm mark, exactly half way between the initial move.
More error increase in the positive direction.
I have "reset all built in defaults" in Liteplacer software and still I have the issue.
I don't know where to fix this.
Belts are nice and tight.
I eventually put a ruler under the downward facing camera to find out the issue. When I jog in one direction and the same distance in the other direction I don't end up in the same spot. As I repeat the error increasing with every iteration.
Alt-F7,Atl-F8 it 10 mm up and 10 mm down. After 5 iterations in landing 1mm above the start location. After 25iterations i'm landing at the 5mm mark, exactly half way between the initial move.
More error increase in the positive direction.
I have "reset all built in defaults" in Liteplacer software and still I have the issue.
I don't know where to fix this.
Belts are nice and tight.