Page 1 of 1
Pickup Tube
Posted: Thu Aug 13, 2015 8:21 am
by Covert
I'm trying to work out why the machine is inconstant with it's needle location. I noticed some play in the Linear Bearings. I found the 8mm Steel tube is only 7.8mm. I haven't worked out how to best reduce the play yet so I can't tell if it's the root of my issue.
I's this piece undersized or is that the size one all kit's ?
Re: Pickup Tube
Posted: Thu Aug 13, 2015 12:13 pm
by mawa
Re: Pickup Tube
Posted: Thu Aug 13, 2015 1:22 pm
by JuKu
The spring takes the play out of play to Y direction, the tension of the rotation belt to the X direction.
Re: Pickup Tube
Posted: Wed Aug 19, 2015 4:47 am
by Covert
OK. I think I have worked out my issue. Needle wobble doesn't seem to be taken into account all the time. I'm using the Reza mod, not sure if it's an issue only in the resa mod.
Removing all the wobble in the needle has fixed the issue for now. I'm going to look over the source and see whats missing when I have some time.