hi all

[protokos]

Hi All.

my name is Wil.
im living in the Netherlands, and my hobby is electronics.

Now i want to build the Pick and place machine.

Please give me advise .

grt Wil.

[mrandt]

Goede middag Wil,

welcome to the forum

Have you already ordered the kit from Juha? That is by far the easiest way to source all the parts, especially all the custom laser-cut steel plates.

Shop here:
http://www.liteplacer.com/shop20/

I recommend you also get the drag chains for easier cable routing.

You still have to provide a few additional items:

• Power supply: 24V DC, >5A
• Cables and wires
• Connectors, termination blocks, ferrules and other cabling accessories
• Drag chains or other cable management
• Enclosure for electronics
• Reset/kill/safety switch and its mount
• Work table, screws to secure to machine to it
• Computer
• Tools

You will find lots of suggestions for these items on the forum - I have recently put a lot of suggestions in a post:
http://www.liteplacer.com/phpBB/viewtop ... t=10#p1629

Feel free to post additional questions to which you don't find the answer using the search function and reading a few threads

Once you get the kit, follow Juha's excellent instructions to put it together:
http://www.liteplacer.com/assembly-instructions/

Many people have enhanced their LitePlacer's; these mods include different cameras, modified or replaced vacuum pumps, cabling and cable routing, pick and place head, customized software etc.

It is probably best to establish a baseline first and get the original LitePlacer to work before you change it around, just my two cents.

Good luck and have fun!

Best regards
Malte