Enclosure build for Tinyg and DC supply
Posted: Sat Dec 31, 2016 3:53 pm
I am happy to share pictures and design files of our build. We bought a cheap MiniITX pc enclosure and created a custom plate to attach tinyg to where the mainboard normally resides. The DC power supply is not properly attached yet but we are currently too lazy to drill holes into the bottom of the enclosure... 
Another nice feature of this pc enclosure is that it has an AC jack at the back that is wired internally to the DC supply, by cutting the end of this cable and routing it to the meanwell dc converter you get a proper single AC plug for the entire liteplacer hardware. With the desktop form factor you can nicely put a monitor and the emergeny stop button on top of this:
https://wiki.apertus.org/index.php/Lite ... _Enclosure
Another nice feature of this pc enclosure is that it has an AC jack at the back that is wired internally to the DC supply, by cutting the end of this cable and routing it to the meanwell dc converter you get a proper single AC plug for the entire liteplacer hardware. With the desktop form factor you can nicely put a monitor and the emergeny stop button on top of this:
https://wiki.apertus.org/index.php/Lite ... _Enclosure