Laser Cut Case Design
Posted: Sun May 07, 2017 5:16 pm
I've designed a see-thru laser cut case to hold the electronics and PSU for the Liteplacer.
It uses a large 24V 15A PSU with standard mounting pattern, so can be adapted to a PSU you have on hand easily if it's smaller.
Includes all the SVG files (can be edited in Inkscape) and uses strain reliefs to reduce cost. If you mount the Liteplace on a 2x4ft surface, the
case fits on the surface to the right of the machine.
Uses a standard 12V PC case fan (approx 200-300ma current draw). Regulator on board the TinyG can supply both the ring LEDs and fan.
It uses a large 24V 15A PSU with standard mounting pattern, so can be adapted to a PSU you have on hand easily if it's smaller.
Includes all the SVG files (can be edited in Inkscape) and uses strain reliefs to reduce cost. If you mount the Liteplace on a 2x4ft surface, the
case fits on the surface to the right of the machine.
Uses a standard 12V PC case fan (approx 200-300ma current draw). Regulator on board the TinyG can supply both the ring LEDs and fan.