SOLD: liteplacer complete setup for sale (with feeders!)
Posted: Mon Dec 04, 2017 6:57 pm
Hello All
I'm downsizing my workshop and regretfully have to part with Mr Picky, my liteplacer.
Since early 2016 this wonderful machine has assembled over a thousand pcbs and has paid for itself many times over so I don't mind selling at a loss providing it goes to a loving home!
I currently use Mr Picky with my own processing sketch which controls the liteplacer and feeders on a mac,
No vision system, it relies on predefined locations in the software. The top down camera is used the jog liteplacer to store locations of parts on the feeders etc
It parses the same CSV files as liteplacer for the jobs.
However I didn't modify the hardware in any way to prevent it working with the original windows software.
I'm including four arduino-controlled 10x8mm lane Versatronics feeders, (paid 120GBP each)
Intel NUC Hackintosh OS X El Capitan i3 1.8Ghz 4GB RAM 128GB SSD and peripherals, (paid 340GBP in 2016)
17" lcd monitor
Logitech M570 Laser Wireless Trackball
usb keyboard
The liteplacer works great and includes the nozzle upgrade, 5A 24V power supply, original 2 webcams and the better third party one
Everything needed to run the machine.
I'd like 1K euro for the whole lot (less than half my investment)
here is a little video in action (sorry about the terrible focusing!!)
https://youtu.be/mVwSAUTkYJk
It is located in France, happy to send anywhere in the world at cost.
Thanks!
Alex
I'm downsizing my workshop and regretfully have to part with Mr Picky, my liteplacer.
Since early 2016 this wonderful machine has assembled over a thousand pcbs and has paid for itself many times over so I don't mind selling at a loss providing it goes to a loving home!
I currently use Mr Picky with my own processing sketch which controls the liteplacer and feeders on a mac,
No vision system, it relies on predefined locations in the software. The top down camera is used the jog liteplacer to store locations of parts on the feeders etc
It parses the same CSV files as liteplacer for the jobs.
However I didn't modify the hardware in any way to prevent it working with the original windows software.
I'm including four arduino-controlled 10x8mm lane Versatronics feeders, (paid 120GBP each)
Intel NUC Hackintosh OS X El Capitan i3 1.8Ghz 4GB RAM 128GB SSD and peripherals, (paid 340GBP in 2016)
17" lcd monitor
Logitech M570 Laser Wireless Trackball
usb keyboard
The liteplacer works great and includes the nozzle upgrade, 5A 24V power supply, original 2 webcams and the better third party one
Everything needed to run the machine.
I'd like 1K euro for the whole lot (less than half my investment)
here is a little video in action (sorry about the terrible focusing!!)
https://youtu.be/mVwSAUTkYJk
It is located in France, happy to send anywhere in the world at cost.
Thanks!
Alex
)