Experiences Using Liteplacer PnP
Posted: Wed Jul 22, 2020 5:49 pm
Hi,
I posted a series of videos about my build process but only recently got around to putting something together that shows a bit of the hurdles and test runs I've done.
So far, I've produced about 70 boards (6 very different designs) and am in general very happy with the machine.
You can see it in action, as well as learn about how I got things setup and working, here:
https://www.youtube.com/watch?v=uUfGu2s ... fC&index=5
I hope this helps anyone else using (or thinking of getting) Liteplacer, me know here or through the youtube comments if you have any questions.
Cheers,
P
I posted a series of videos about my build process but only recently got around to putting something together that shows a bit of the hurdles and test runs I've done.
So far, I've produced about 70 boards (6 very different designs) and am in general very happy with the machine.
You can see it in action, as well as learn about how I got things setup and working, here:
https://www.youtube.com/watch?v=uUfGu2s ... fC&index=5
I hope this helps anyone else using (or thinking of getting) Liteplacer, me know here or through the youtube comments if you have any questions.
Cheers,
P