Software release, 17/06/2016

[JuKu]

Build date 6/17/2016

New Features

* Added blur and gaussian blur to image processing functions

Bug fixes

* Empty field in CAD data now produces a warning, not an error
* No more crash in trying to reselect a disconnected camera

--
Blur was requested by a customer. Warning: The functions are slow and slower, they add about half a second to a measurement.

[michael-yurov]

JuKu, Many thanks!

The old link to the download page on the version of 06.06.2016 instead of 17.06.2016

http://www.liteplacer.com/Downloads/Lit ... _2016b.exe
--
edit by JuKu: The original link points to a version with a bug. I added the b.

[JuKu]

Fixed that, and fixed a mishap. If you have downloaded LitePlacer_Install_17_06_2016.exe, there is a bug in it. Use this instead:
http://www.liteplacer.com/Downloads/Lit ... _2016b.exe.

[michael-yurov]

With the new version of the program there was a problem.
The software can not read the Job Data file.

2016-06-17_20-24-20.png (372.74 KiB) Viewed 5865 times

2016-06-17_20-23-37.png (375.23 KiB) Viewed 5865 times

[JuKu]

Odd, as I didn't touch that part. Could you please send me a job file that doesn't open?

[michael-yurov]

Odd, as I didn't touch that part. Could you please send me a job file that doesn't open?

I have recently made changes in the Job Data File.
Perhaps the problem appeared after I saved the edited file.

[caprisonne]

Hello,

after updating to the new SW I can't load CAD data which worked with the last software.

When I load the file a windows pops up giving me an Empy field warning (see attachment). After hitting OK, the same windows pops up again and again and again... !?

This is the KiCad file I wanted to load:

### Module positions - created on 11.06.2016 13:58:33 ###
### Printed by Pcbnew version kicad 4.0.2-stable
## Unit = mm, Angle = deg.
## Side : top
# Ref Val Package PosX PosY Rot Side
Fid1 fiducial testFid 173.04 -84.1604 0.0 top
Fid2 fiducial testFid 126.8019 -65.2374 0.0 top
Fid3 fiducial testFid 121.4120 -122.3010 0.0 top
Fid4 fiducial testFid 153.0350 -101.6000 0.0 top
C1 10u SM0805-simple 121.9200 -130.3020 180.0000 top
C2 10u SM0805-simple 120.9040 -110.2360 180.0000 top
C3 100n SM0603 125.4760 -104.6480 0.0000 top
C4 100n SM0603 125.4760 -97.5360 0.0000 top
C5 100n SM0603 125.4760 -90.4240 0.0000 top
C6 100n SM0603 159.6644 -127.0508 180.0000 top
C7 100n SM0603 150.8760 -106.2990 180.0000 top
C8 100n SM0603 161.9250 -106.2990 0.0000 top
C9 100n SM0603 171.3230 -123.3170 90.0000 top
C10 100n SM0603 171.3230 -120.0150 90.0000 top
C11 100n SM0603 171.3230 -108.2040 270.0000 top
C12 100n SM0603 129.7940 -125.9840 0.0000 top
C13 100n SM0603 142.6210 -106.2990 0.0000 top
C14 100n SM0603 167.6400 -100.0760 180.0000 top
C15 100n SM0603 133.6040 -90.6780 180.0000 top
C50 100n SM0603 165.6080 -87.1220 90.0000 top
C51 100n SM0603 163.0680 -87.1220 90.0000 top
C52 10u SM0805-simple 163.0680 -90.6780 90.0000 top
FB50 Ferrite_Bead SM0805-simple 165.6080 -90.6780 270.0000 top
R3 100k SM0805-simple 125.4760 -102.3620 0.0000 top
R4 100k SM0805-simple 125.4760 -95.2500 0.0000 top
R5 100k SM0805-simple 125.4760 -88.1380 0.0000 top
R6 4k7 SM0805-simple 125.4760 -99.8220 180.0000 top
R7 4k7 SM0805-simple 125.4760 -92.7100 180.0000 top
R8 4k7 SM0805-simple 125.4760 -85.5980 180.0000 top
R9 470 SM0805-simple 133.6040 -85.5980 0.0000 top
R52 4k7 SM0805-simple 170.8150 -94.6150 0.0000 top
R53 4k7 SM0805-simple 170.8150 -97.1550 0.0000 top
U1 SPX5205M5-L-3-3/TR SOT23-5 120.9040 -114.8080 270.0000 top
U2 XC95144XL-TQ100 TQFP_100 160.9090 -116.8400 270.0000 top
U4 MX29LV640EBT TSOP1-48 142.2400 -119.8880 0.0000 top
U6 74LVC14 SO14E 133.6040 -97.0280 270.0000 top
U50 FT245RL SSOP28 155.4480 -88.9000 0.0000 top
## End

[JuKu]

Fixed these: http://www.liteplacer.com/Downloads/Lit ... 6_2016.exe

[michael-yurov]

Fixed these: http://www.liteplacer.com/Downloads/Lit ... 6_2016.exe

JuKu, many thanks!
20.06.2016 loads Job Data correctly!