Simple Wiring Diagram for wiring direct to Tiny G

stonedeaf · Post by **stonedeaf** » Mon Sep 19, 2016 2:30 pm

Hi Guys can anyone provide me with a simple wiring diagram.

To be honest the mechanical construction instructions are fantastic, but the electrical is very poor in terms of telling you what to do. It assumes a certain amount of knowledge and this is slowing me down and I am soldering direct to the pin head connectors.

So both led rings have been wired to the 12v supply ( is this correct???) Red to 12v and black to ground.

The solenoid wiring instuctions are not clear, are they being wired to the same place??? No actual definitive answer.

All I need is screen shots if anyone has one?

Cheers

Luke Hilton

Post by **JuKu** » Mon Sep 19, 2016 7:17 pm

I'll make better description and draw schematics hopefully tomorrow. Quick answers:

> So both led rings have been wired to the 12v supply ( is this correct???) Red to 12v and black to ground.

Yes. LED rings in parallel to 12V, which you can get from TinyG fan connector by setting the jumper as shown here: https://github.com/synthetos/TinyG/wiki/TinyG-Start

For solenoid and pump: Duplicate the FET circuitry shown at http://www.liteplacer.com/fet-switches/; connect one of the connector+ and connector- pins to pump + and - . The other connector pins go to solenoid, which isn't polarized. The control pin for pump is TinyG’s “Spin” and for vacuum, it is pin “Cool” (in the TinyG diagram, upper right).

Post by **JuKu** » Tue Sep 20, 2016 1:47 pm

Does this help?
< link to old version deleted >

Timbosaurus · Post by **Timbosaurus** » Sat Oct 22, 2016 9:19 am

Hi Juha,

I think the outputs for the pump and the solenoid are reversed in this diagram.

Caught me out for a little while, but it's the only fault I could find after 2 days of blindly following your instructions!

Regards,
Tim

Post by **JuKu** » Mon Oct 24, 2016 4:34 pm

Fixed now (<link to old version deleted>). thank you for the notice!

AnalysIR · Post by **AnalysIR** » Sat Apr 17, 2021 4:23 pm

@JuKu

I suggest you delete the incorrect pdf above, to avoid mix-ups.

(I came across the incorrect version via search...luckily I remembered this forum thread & checked!)

Post by **JuKu** » Mon Apr 19, 2021 2:42 pm

Thank you for the heads up! Link to the wiring diagram in in the instructions page: https://liteplacer.com/wiring/

LitePlacer.com forums

Simple Wiring Diagram for wiring direct to Tiny G

Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G

Re: Simple Wiring Diagram for wiring direct to Tiny G