Pickup Tube

Post Reply
Covert
Posts: 79
Joined: Thu Jun 18, 2015 1:10 am

Pickup Tube

Post by Covert »

I'm trying to work out why the machine is inconstant with it's needle location. I noticed some play in the Linear Bearings. I found the 8mm Steel tube is only 7.8mm. I haven't worked out how to best reduce the play yet so I can't tell if it's the root of my issue.

I's this piece undersized or is that the size one all kit's ?
mawa
Posts: 139
Joined: Wed Jun 10, 2015 1:23 pm
Location: Near Hamburg, Germany

Re: Pickup Tube

Post by mawa »

best regards
Manfred
JuKu
Site Admin
Posts: 1114
Joined: Thu Feb 14, 2013 3:06 pm
Location: Tampere, Finland
Contact:

Re: Pickup Tube

Post by JuKu »

The spring takes the play out of play to Y direction, the tension of the rotation belt to the X direction.
Covert
Posts: 79
Joined: Thu Jun 18, 2015 1:10 am

Re: Pickup Tube

Post by Covert »

OK. I think I have worked out my issue. Needle wobble doesn't seem to be taken into account all the time. I'm using the Reza mod, not sure if it's an issue only in the resa mod.

Removing all the wobble in the needle has fixed the issue for now. I'm going to look over the source and see whats missing when I have some time.
Post Reply