Bad data in warning threshold

[Jet]

I'm getting a Bad data in warning threshold error during nozzle calibration, however it doesn't say calibrationfailed.

If this an issue or not? Thanks:

Measuring nozzle, min. size 0.3, max. size0.5
CNC_A_m, a: 0
-- zero A movement command --
CNC_A_m, a: 22.5
==> {"gc":"G0 A22.5"}
{"r":{},"f":[1,0,18,77]}
{"sr":{"posa":0.005,"vel":63.95,"stat":5}}
{"sr":{"posa":22.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 45
==> {"gc":"G0 A45"}
{"r":{},"f":[1,0,16,75]}
{"sr":{"posa":22.505,"vel":63.95,"stat":5}}
{"sr":{"posa":45.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 67.5
==> {"gc":"G0 A67.5"}
{"r":{},"f":[1,0,18,77]}
{"sr":{"posa":45.005,"vel":63.95,"stat":5}}
{"sr":{"posa":67.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 90
==> {"gc":"G0 A90"}
{"r":{},"f":[1,0,16,75]}
{"sr":{"posa":67.505,"vel":63.95,"stat":5}}
{"sr":{"posa":90.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 112.5
==> {"gc":"G0 A112.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":90.005,"vel":63.95,"stat":5}}
{"sr":{"posa":112.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 135
==> {"gc":"G0 A135"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":112.505,"vel":63.95,"stat":5}}
{"sr":{"posa":135.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 157.5
==> {"gc":"G0 A157.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":135.005,"vel":63.95,"stat":5}}
{"sr":{"posa":157.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 180
==> {"gc":"G0 A180"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":157.505,"vel":63.95,"stat":5}}
{"sr":{"posa":180.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 202.5
==> {"gc":"G0 A202.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":180.005,"vel":63.95,"stat":5}}
{"sr":{"posa":202.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 225
==> {"gc":"G0 A225"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":202.505,"vel":63.95,"stat":5}}
{"sr":{"posa":225.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 247.5
==> {"gc":"G0 A247.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":225.005,"vel":63.95,"stat":5}}
{"sr":{"posa":247.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 270
==> {"gc":"G0 A270"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":247.505,"vel":63.95,"stat":5}}
{"sr":{"posa":270.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 292.5
==> {"gc":"G0 A292.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":270.005,"vel":63.95,"stat":5}}
{"sr":{"posa":292.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 315
==> {"gc":"G0 A315"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":292.505,"vel":63.95,"stat":5}}
{"sr":{"posa":315.000,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 337.5
==> {"gc":"G0 A337.5"}
{"r":{},"f":[1,0,19,78]}
{"sr":{"posa":315.005,"vel":63.95,"stat":5}}
{"sr":{"posa":337.500,"vel":0.00,"stat":3}}
ReadyEvent stat
CNC_A_m, a: 360
==> {"gc":"G0 A360"}
{"r":{},"f":[1,0,17,76]}
{"sr":{"posa":337.505,"vel":63.95,"stat":5}}
{"sr":{"posa":360.000,"vel":0.00,"stat":3}}
ReadyEvent stat
Stored calibration for nozzle 2
==> {"gc":"G0 Z0"}
{"r":{},"f":[1,0,15,74]}
{"sr":{"posz":37.454,"vel":0.21,"stat":5}}
{"sr":{"posz":31.303,"vel":1000.00}}
{"sr":{"posz":23.141}}
{"sr":{"posz":14.979}}
{"sr":{"posz":6.817}}
{"sr":{"posz":0.015,"vel":68.36}}
{"sr":{"posz":0.000,"vel":0.00,"stat":3}}
ReadyEvent stat
A: 0.000, X: 0.018, Y: 0.073
A: 22.500, X: 0.000, Y: 0.073
A: 45.000, X: -0.036, Y: 0.091
A: 67.500, X: -0.073, Y: 0.073
A: 90.000, X: -0.109, Y: 0.073
A: 112.500, X: -0.127, Y: 0.037
A: 135.000, X: -0.127, Y: 0.000
A: 157.500, X: -0.109, Y: -0.037
A: 180.000, X: -0.073, Y: -0.037
A: 202.500, X: -0.036, Y: -0.073
A: 225.000, X: 0.000, Y: -0.073
A: 247.500, X: 0.018, Y: -0.055
A: 270.000, X: 0.036, Y: -0.018
A: 292.500, X: 0.073, Y: 0.000
A: 315.000, X: 0.054, Y: 0.037
A: 337.500, X: 0.054, Y: 0.073
A: 360.000, X: 0.018, Y: 0.073
Bad data in warning treshold

[Krzys]

Hello.
You need to set a value of eg 0.5 in the field "warning threshold"

Regards.

Krzysztof

[JuKu]

As Krzysztof said.

Setting a number in a box that is larger than the wobble of the tip but not much larger (eye accuracy is fine) will give you a warning if a calibration value is bigger, guarding against possible vision errors. With no data there, you don't get warnings, but that doesn't prevent the calibration running.

[Jet]

Thanks.

Also, that box gets cleared out on every restart of the app

[JuKu]

Thanks.

Also, that box gets cleared out on every restart of the app

Fixed in the next release. Thank you for pointing that out.