LiteSolder - Solderpaste dispenser upgrade

[LiteSolder Team]

Hey guys!

We've build LiteSolder an automatic solderpaste dispensing system which uses camera-calibration. Its an easy and simple but still effective way to dispense solderpaste to your PCB up to Footprints like TQPF-100 or BGA81. Its implemented to the LitePlacer-System. Its almost 3D-printed and no extra hardware unless the extruder parts are needed. - If you want rebuild or make it better: Visit our LiteSolder Wiki with a precise manual and step by step guide. Everything is open source, from the code to the 3D parts and our suggestions for the solderpaste. Make your first PCB batch using LiteSolder and LitePlacer. The parts from local shops just costs around 100$, probably you'll find cheaper way.

We hope you'll like LiteSolder!

Visit our Wiki here: https://github.com/Carinalo93/LiteSolder

[arnaud]

Hi,

I want to use Litesolder in my liteplacer however i don't have the mode select with place or dispense on my software.
Can you help me please?

Thans you in advance and thanks for your works

[elcomportal]

Hi,
is it possible to buy the parts for building the litesolder? I don't habe a laser cutter and a 3D-printer, so it is not possible for me to do it myself.

Torsten