Page 1 of 1

Minor bug in 2mm pitch pick up

Posted: Sun Oct 02, 2016 7:42 pm
by flying_fred
Hi Juha,

I'm trying to define a tape tray with some 0402 components and it seems I've exposed a small bug.

The tape is set as 8/2mm and is located on the right side of the Liteplacer, thus with -X direction.
What happens is that the odd and even components locations on tape are mixed. That is, when going from right to left we have components number 2, 1, 4, 3, 6, 5... and so on.

Fred.

Re: Minor bug in 2mm pitch pick up

Posted: Mon Oct 03, 2016 5:45 pm
by JuKu
> number 2, 1, 4, 3, 6, 5...

Actually, it was 3, 2, 5, 4, ... The first one was never picked up. Fixed in todays release.

Re: Minor bug in 2mm pitch pick up

Posted: Tue Oct 04, 2016 4:00 pm
by JuKu
I was told that the fix is broken. For now, fast placement for 2mm pitch parts (0402s) does not work. :( I'll fix this asap. Until then, use normal placement. Without getting to my lab, I'm guessing that still works. More updates here when available, now heading into the lab.

Re: Minor bug in 2mm pitch pick up

Posted: Wed Oct 05, 2016 2:12 pm
by JuKu
Fixed that and other issues: See http://www.liteplacer.com/phpBB/viewtop ... f=10&t=389 and use http://www.liteplacer.com/Downloads/Lit ... 0_2016.exe (unless there is even newer version, of course).