LitePlacer.com forums

New one's are 37 euro on taoboa;
Used one's are 25-30 euro

This one has sold a reasonable amount: https://img.alicdn.com/imgextra/i1/305397115/TB2q6cpoFXXXXXgXpXXXXXXXXXX_!!305397115.jpg https://item.taobao.com/item.htm?spm=2013.1.w4023-31115218.10.rIRCkQ&id=527412094874 16.8K RMB for the full thing place for 30 feeders , ballscrews , linear guides and ...

I also posted this on eevblog. But It might also be useful for people here: While browsing taoboa for random things I found this: https://item.taobao.com/item.htm?spm=2013.1.20141003.10.rKoPcY&scm=1007.10011.60084.100200300000001&id=25948908047 https://gd1.alicdn.com/imgextra/i1/1037288188/T...

Got mine, works great. Had problem with a smal IXYS solar panel. But everything else has been fine.

just my 2 cents but when you are building those amounts of boards the neoden 4 or the likes might be a good option.

make a mould and use polyurethane for the casing. Works great.

mould can be wood , plastic or whatever

If there is interest it might be smart to outsource a few parts. Case can be 3d printed, the "flat" metal parts can be laser / water jet cutted. The gear needs to be machined? Of course there should be some kick back to the designer. This is probably still in beta so there is some acceptab...

I can also convert to solidworks or autodesk fusion360 (great + free!)

some googeling:
http://www.knasmusic.com/index.php

neoden4 does the position via up looking camera for each device. It does not do any position adjustment in the feeder.
As far as i know the liteplacer does now also look with the down looking camera at the position of the passive.

Neoden uses this for all methods, 0201 etc.. and it works fine.

http://www.aliexpress.com/store/product/8MM-Feeders-parts-for-new-pick-and-place-machine-NeoDen4-NeoDen-Tech/231845_32524972798.html seems just to be a "dumb" stepper signal input and for the peeler a dc input. I might try this out. http://i.imgur.com/aHTH2wx.png Got conformation that the ...